Pdms Sample Project Free

Posted on

PDMS Project Administration: The Project is a fundamental concept in PDMS, and all work takes place within a project. Everything that is defined in PDMS ADMIN is specific to a given project, although it is possible to read databases in another project. This module is only used by project PDMS administrator to create piping specification.

Plant design management system (PDMS) and it’s related application provides a powerful suit of facilities for the creation analysis documentation of a real-life plant in three dimensional representation in a logically interconnected system.

1. Features Of Plant Design And Management System (PDMS)

  • Concurrent engineering
  • Controlled catalogue database
  • Automatic drawing production
  • Isometric generation
  • Material takeoff
  • Report generation
  • Clash checking
  • Interfacing with third party software
  • Project progress monitoring
  • Customization -PML Programming
  • Training and maintenance

How PDMS is organized

How PDMS is organised

Different Modules In PDMS

The different modules available in PDMS are listed below:

  • Monitor
  • Design
  • Diagrams
  • Schematic Model Manager
  • Spooler
  • Draft
  • Isodraft
  • Paragon
  • Specon
  • Propcon
  • Lexicon
  • Admin

1. Admin module in PDMS

PDMS Project Administration: The Project is a fundamental concept in PDMS, and all work takes place within a project. Everything that is defined in PDMS ADMIN is specific to a given project, although it is possible to read databases in another project.

This module is only used by project PDMS administrator to create piping specification required as per the project material specification.

The following are the key operation in admin module

1. Creation of MDB

2. Creation of DBS

3. Creation of TEAM

4. Creation of users

5. Access control

6. Replication

7. Reconfigure

8. Communication

9. Backtracking

10. Session control

Admin in PDMS

2. Monitor Module in PDMS

Monitor allows the PDMS user to enter into a pdms project . This is a real life simulation of working in a controlled working environment . This feature controls unauthorized access to the project and also checks the user status for access.

This module gives the project information which has been assigned during the PDMS project set up. The information like Project, Project name, Project code, Project Number is available in this module. It also lists the different MDB available in the project which can be used.

3. Design Module in PDMS

Free

This module has different sub-modules like General, Equipment, Pipework, Cable Trays, HVAC Designer, Structures, Design Templates & Cabling System. Each of the sub-module is used by the modeler to model or create a graphical representation of the component required as per design requirement. There are many general commands and sub-module specific commands which are available to the user in different sub-module.

Fig 2: Design module display screen

4. Isodraft Module in PDMS

ISODRAFT can be used to produce isometric plot files of pipes and networks, from either the Design or Fabrication databases, to your own required standards. These drawings can be used for pipe work fabrication, as well as during on-site erection.

The isometrics produced can be fully dimensioned and annotated to ensure that you find them easy to use and unambiguous.

PDMS administrator has to create the back-up project template so that all the isometrics are extracted in the project required. This back-up template is available to the modeler when he starts extracting the isometrics using the standard isometric utility.

Using isodraft system isometrics can also be extracted.

Fig 3: Isodraft module display screen

– System isometric showing a complete piping network and equipment trim

– Automatic spool identification

– User defined Drawing Format

– Automatic splitting of complex Drawing

– Automatic isometric including the associated material list

– Standard isometric of pipe zone or spool

5. Draft Module in PDMS

This module is used to extract project general arrangement drawing. Using this module all discipline including piping, structural, electrical etc. extract all the required general arrangement drawing. PDMS administrator has to create the back-up project template so that all the general arrangement drawings are extracted in the project required. This back-up template is available to the modeler when he starts extracting the isometrics using the standard isometric utility.

Pdms sample project free templates

Extacting general arrangement drawing using draft module helps user to use annotation & tagging as required.

Fig 4: Draft module display screen

Draft enables you to do the following

– View creation

– Dimensioning

– Annotating

– Labelling

– 2-D drafting

6. Paragon Module in PDMS

Paragon is used to input and modify the component catalogue stored in the PDMS Project Database .It is similar to the Manufacturers catalogue which we refer while conventional design

This module is only used by project PDMS administrator to create different catalogue, section & categories required in the project. PDMS administrator also uses this module to create project bolt table & connection table (Coco table) as per project specification.

Paragon enables you to do the following

Pdms Sample Project Free Template

– Specifying the

– Geometry

– Connection information

– Obstruction feature

7. Specon module in PDMS

Specon is used to input and modify project specification. This is similar to manual pipework which assists and constrains the designer in the selection of components

Specon enables you to do the following

– Specifying the detail text

Pdms Sample Project Free Download

– Pipng symbol

– Catalogue reference

8. Lexocon module in PDMS

Lexicon allows the PDMS Administrator to add new attributes to any element in the design catalogue or the drawing database. Once defined udas can be accessed in the same way as the standard attributes

9. Propcon module

This module is used to construct a Properties Database . The database contains data for use with stress analysis package and safety auditing of all parts of design.The data structure is designed to provide information suitable for any stress analysis package if required.

Propcon module in PDMS

Pdms Sample Project Free Printables

I am working on a project to analyze for residual antifoam in vaccines via Silicon. The antifoam is a polydimethylsiloxane (PDMS) emulsion prepared from a 30% PDMS emulsion. This antifoam is 3% and is further added to the vaccine resulting in a final 0.1% antifoam max. We are trying to analyze down to about 35 ppb Si in solution by ICP-OES and our method is working just fine but we are struggling to get a digestion to work. Currently we have worked with nitric and HF in a microwave digestion but this is not viable for us due to contamination that we cannot remove. So we have moved to a hot block digestion but cannot get recoverable Si. In looking at your notes on this exact problem we see the alcoholic KOH with Xylene but we do not have the sample intro to analyze this matrix. It is not quite clear if there is a way that we can predigest using KOH and then continue with nitric and/or HF to have an aqueous test sample. The notes online seem to suggest a few options but we are having trouble parsing the information and choosing concentrations for reagents. Is this chemistry effective and do we need to use alcoholic KOH or just KOH in water followed by nitric or HF? Can you suggest what concentration of KOH is needed initially to unzip the PDMS if we are working with a potential of up to 50 mg of PDMS in our digestion vessel?